Quilted Planter – Vase Mode STL

About this model

A wide, slightly flared planter with a soft quilted diamond lattice. Cosy and modern, great for herbs and house plants. Size: 151 × 151 × 140 mm (W × D × H). Scale freely, e.g. 70–150 %. Filament (vase mode, PLA): approx. 69 g Included files: - 13-quilted-planter_vase-mode.stl: solid model for vase mode (spiralize) - 13-quilted-planter_shell-1.6mm.stl: 1.6 mm wall and bottom for normal printing What was used: - Height: 140 mm - Bottom diameter: 125 mm - Top diameter: 150 mm - Section shape: Circle - Profile: Linear taper - Texture: Diamond lattice, depth 2 mm, pitch 26 mm Prints without supports (all overhangs ≤ 45°). License: Personal use only. Printed items may not be sold without a commercial license (contact diateh@diateh.hr). Do not share or redistribute the files. Print settings Desktop FDM printer, no supports needed (all overhangs ≤ 45°). SOLID STL (..._vase-mode.stl) - Vase mode / "Spiralize outer contour" ON - 0 top layers, 3–5 bottom layers - Nozzle 0.4 mm (0.6 mm works great too) - Line width 0.6–0.8 mm, layer height 0.2–0.3 mm - PLA, PLA Silk or PETG SHELL STL (..._shell-1.6mm.stl) - 1.6 mm wall and 1.6 mm bottom - Print normally, 2–4 walls, no supports - Use this one for a thicker wall or if your slicer has no vase mode Tip: vase mode prints are not fully watertight. Use a glass insert for fresh flowers or coat the inside. Generated with the DIATEH GEN parametric engine.