FPV Antenna Mount #02 – Snap-On TPU Receiver Antenna Holder (ELRS / Crossfire) | 5 & 6 mm Standoffs | 6 Versions

Über dieses Modell

**FPV Antenna Mount #02 — part of the FPV Crash Kit series.** Receiver antennas are the first thing that gets cut by props or ripped off in a crash. This TPU holder snaps onto a round frame standoff (5 mm or 6 mm) — or zip-ties to an arm — and keeps the antenna tips up and away from the props. Dual V version for ELRS / Crossfire diversity or T-antennas, single-tube version for one antenna. ### All sizes in one download - **5 mm standoff · dual V** — `fpv02_antenna_mount_clip_5mm_dual_V.stl` (42 × 19 × 29 mm) - **5 mm standoff · single** — `fpv02_antenna_mount_clip_5mm_single.stl` (9 × 23 × 33 mm) - **6 mm standoff · dual V** — `fpv02_antenna_mount_clip_6mm_dual_V.stl` (42 × 20 × 29 mm) - **6 mm standoff · single** — `fpv02_antenna_mount_clip_6mm_single.stl` (10 × 24 × 33 mm) - **zip-tie · dual V** — `fpv02_antenna_mount_ziptie_dual_V.stl` (42 × 24 × 29 mm) - **zip-tie · single** — `fpv02_antenna_mount_ziptie_single.stl` (14 × 27 × 33 mm) You get every version as a separate STL (in the ZIP, with a README) plus one 3MF plate with all versions laid out. ### Mounting - clip versions: push the open side of the clip onto a round rear standoff until it snaps; slide it up or down to set the height. - zip-tie versions: put a 4 mm zip tie through both slots and around an arm or standoff. - Thread the receiver antenna wire through the tube; leave the active element (tip) sticking out. ### Good to know - **Digital file only.** You get 3D printing files — no physical item is shipped. Bolts, nuts and electronics are not included. - **Made with AI:** designed with AI assistance (declared according to Cults rules). Pictures are renders, not photos of a printed part. - Built on standard dimensions; meshes are checked (watertight). Not physically test-printed yet — please post a Make if you print one! - Fly safely and follow your local drone rules. License: personal use only. Please do not share or resell the files.